Other
$20.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
- Asymmetrical design with an offset slot specifically for carbon seatposts
- Fitment based upon seattube sizes: 34.9-35.2 For 31.6 Posts.
- 24g
$13.99
$14.00
On Sale
- Compatible with Super Record, Record, and Athena EPS systems
- Required for use with the charger and works with V2 systems
- USA/North America plug - adapters required for other countries
$54.99
Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals.
- Kit includes 2 bearings and 2 seals
$2.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$10.99
$11.00
On Sale
110-Series Alloy Interlok Headset Spacer
- Aluminum construction
$10.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$14.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
$21.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
$54.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
- Cane Creek Hellbender Bearing, 52mm SHIS
$19.99
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 18307 Bearing
$99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Includes end cap for 12 x 142 and 12 x 148mm hubs
Fits Shimano 12-speed Micro Spline cassettes
Crafted from lightweight aluminum
Compatible with 12mm thru-axles
$39.99 - $44.99
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation
$41.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
Cannondale Headshok/Lefty Bearing
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$44.90
- CNC machined aluminum alloy
- Fits 26.8mm (1-1/8-inch) steer tube
$29.99
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$14.99
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$14.99
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$18.99
FSA (Full Speed Ahead) Chainring Bolts
$29.99
Replace your old aerobar armrest pads and upgrade to the comfort of Fizik's TechNoGel Tri Pads. Made from Fizik's shock-absorbing Technogel, these cut-to-fit pads make every second in the aero position easier and more comfortable. Plus, the pads are easily removed for cleaning.
$12.99 - $14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- For bikes without factory mounting plate (includes top plate and bolt)
- 285mm (for bikes 22" and under)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$30.99 - $61.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better braking response
- High carbon internal steel coil for improved stiffness
- Appropriate for Teflon coated cables as well as steel and galvanized
- Length: 10m
Page 1 of 6
Next page