Safety

Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.

•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use

- Clamp-on mirror made from high-impact, heavy-duty nylon fiber composite - High-quality glass with anti-glare properties provides an extremely clear image - Adjustable head allows fine-tuning of the view angle

Give yourself 360 degrees of visibility with Sunlite's Sport Helmet Mirror. It mounts to either your glasses or to your helmet and has a fully adjustable arm for maximum viewing angle.

- Great novelty horn - Fits most handlebars

Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

- Double sided high visibility material - Safety orange color - Flexible 2-piece mounting pole - Standard axle mounting bracket included - Red reflector

Fits 22-25.4mm Handlebars

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

Low profile and brilliant bass dome. Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents. Features - Classic brass sound - Low-profile design with brilliant brass dome - Adjustable rotating thumb spring trigger for ambidextrous use - Quick Assembly: Tool-free - easily mounts to any bar from 22.2 - 36.2 mm - Brass dome with adjustable rubber strap - Weight: 0.08 lb / 34g

Larger, louder—46 grams, black anodized aluminum, adjustable ringer. It's not easy to gain the attention of other cyclists, runners and walkers without making noise, and bells beat yelling. There is actually an art to making a nice sound come out of something so small. Stainless steel thumbscrew so you can install or remove the bell with no tools; fits 31.8 with a shim to fit 28.6.