Brakes/Levers/Pads

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

• Compatible with most side pull and center pull brakes • All weather compound

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Shimano Saint/XTR RT99 Centerlock Disc Rotors - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Weight: 118 g - Rotor Size (mm): 160 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Slide in Serfas' BPS100 Shimano Compatible Road Pads for reliable braking. These cartridge style brake pads install easily and all hardware is included.

Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.

Shimano Road Brake Cable Fixing Unit.

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Serfas' DBPA2 MTB Avid Compatible Disc Brake Pads offer long-lasting, reliable braking. They're semi-metallic for durability and made for Avid BB5 mechanical-disc brakes.

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

Riding with complete confidence in your brakes lets you go faster. With Shimano's Deore XT discs you'll be able to hold your speed until the last second in any situation. The post-mount, mono-body caliper design makes this brake super light and extremely rigid. Cooling fins attached to the pads combat the dreaded fade on long downhills and actually make the pads last longer. The 2-finger Servo-Wave levers create quicker brake engagement without reducing pad clearance at the caliper. They also feature both adjustable reach and free-stroke, so you can dial them in to your hand size. Super clean cable routing is a given, and the radial master cylinder is compact and easy to position for superior ergonomics. And should you ever need to bleed them, Shimano's one-way system is a snap. I-Spec B brake levers are not directly compatible with I-Spec shifters and require an additional conversion kit (sold separately).

Riding with complete confidence in your brakes lets you go faster. With Shimano's Deore XT discs you'll be able to hold your speed until the last second in any situation. The post-mount, mono-body caliper design makes this brake super light and extremely rigid. Cooling fins attached to the pads combat the dreaded fade on long downhills and actually make the pads last longer. The 2-finger Servo-Wave levers create quicker brake engagement without reducing pad clearance at the caliper. They also feature both adjustable reach and free-stroke, so you can dial them in to your hand size. Super clean cable routing is a given, and the radial master cylinder is compact and easy to position for superior ergonomics. And should you ever need to bleed them, Shimano's one-way system is a snap. I-Spec B brake levers are not directly compatible with I-Spec shifters and require an additional conversion kit (sold separately).

Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability

The Shimano Deore SM-RT54 disc brake rotors provide exceptional stopping power in all riding conditions. Shimano's Center Lock mounting system makes installing and removing rotors quick and easy thanks to the spline mount and lockring design. - Includes standard rotor lockring - External-type rotor lockring required when installing onto 15/20mm axle hubs (sold separately) - For use with resin pads only

Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head

• All weather compound • Cantilever post style • Black • 52mm

- High performance compounds recommended for all-conditions - Steel backing

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Shimano: - Deore BR-M575,BR-M525,BR-M515,BR-T615 - LX BR-T675 - Alivio BR-M4050 - Acera BR-M3050 - Altus BR-M375,BR-M365,BR-M315 - BR-M506 - BR-M505 - BR-MT500 - BR-M495 - BR-M486 - BR-M485 - BR-M475 - BR-M465 - BR-M447 - BR-M446 - BR-M445 - BR-M416 - BR-M415 - BR-MT400 - BR-M395 - BR-M355 TRP: - Hylex - HY/RD - Spyre SLC - Spyre - Spyke - Dash Sport Tektro: - Orion SL HD-M740 - Orion HD-M730,HD-M725 - Gemini SL HD-M520 / M521 - Gemini HD-M500 / M501,HD-M510 - Draco2 HD-M352 - HDC330 HD-M330 - Auriga HD-M290 / M291,HD-T530,HD-T525,HD-E530,HD-E525,HD-E520,HD-E500 - Aquila MD-M500 - Aries MD-M300 - MD-M280 - Mira MD-C400 - Volans HD-T710 - Vela HD-T290 - Dorado HD-E715 QUAD: - Disc Brake

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

Take on bigger descents, nastier trails, higher speeds and brake later than ever with Avid's exceptional X0 Trail brakes. These powerful 4-piston brakes weigh in at near cross-country weights, and let you shed speed with authority. With Avid's Contact Point Adjustment, Power Reserve Geometry, and lever reach adjust it's simple and easy to choose between the modulation of a longer throw or the instantaneous power of a short throw. Combine that with Avid's Deep Stroke Modulation and TaperBore technology that gives you incredible control over these hugely powerful brakes and you have some of the most customizable, controllable stoppers around.

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

- Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 140mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 96g

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

Shimano Saint/XTR RT99 Centerlock Disc Rotors - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Weight: 95 g - Rotor Size (mm): 140 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds

- Semi-Metallic brake compound for excellent stopping power in wet or dry conditions - Steel backing plate

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

- Truly universal compatibility (adjustable cable pull for linear/mech disc or caliper/cantilever) - 22.2mm (7/8") clamp - Return spring/reach adjustment - Forged alloy construction - 3-finger lever design - 206g pair

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

• All weather compound • Cantilever post style • Offset Post • Black • 70mm

The Shimano GRX BL-RX812 in-line brake lever delivers greater rider control for mixed-terrain riding thanks to Shimano's category-leading hydraulic disc brakes. The hydraulic disc sub brake lever offers reliable and accessible braking in more positions and allows for quick access while riding upright on the tops of the handlebar. - Quickly brake when riding upright - More confident and accessible braking from multiple positions - Less fatigue on long tours

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping